Pathway temperature: Keep the filament below 80°C prior to extrusion.
Material that sits idle at temperatures of 80°C or above for extended
periods of time prior to extrusion will not extrude properly. Nozzle
Build plate requirements: AquaSys filaments will adhere to a wide
range of build plate materials. If poor adhesion is persistent, increase
the temperature of the build plate, but not past the maximum build
plate temperature of 120°C.
Adhesives: Glue is not necessary if you use a raft made out of
AquaSys 120. Follow your printer model’s material guidelines when
printing a raft with another material.
FDM 3D printing material. Pair AquaSys 120 with any of the following: ABS, PC/ABS, Nylon, TPU, CPE, PC, and PP.