Dental SG Resin
Dental SG is a Class 1 bio compatible resin (EN-ISO 10993-1:2009/AC:2010, USP Class VI) designed to directly print surgical and pilot drill guides. Requires UV post-cure. Follow Instructions for Use.
Dental SG Resin
Class 1 Biocompatible resin for surgical guides.
Dental SG is a Class 1 bio compatible resin (EN-ISO 10993-1:2009/AC:2010, USP Class VI) for creating precise surgical guides and similar applications. Tuned for accuracy and precision, the resin is designed to directly print surgical and pilot drill guides.
1. Digital Design
Design surgical guides by using implant treatment planning software to integrate CBCT and intraoral scan data.
2. Print and Prepare
Print on the Form 2 with Formlabs Dental SG Resin. Post-cure with a cure chamber, remove supports, and add drill sleeves.
3. Procedure
Simply sterilize prints in an autoclave to use surgical guides directly in the mouth during implant surgery.
Effective presurgical planning
Examine vital structures and osseous topography in implant planning software to perform less invasive procedures and conserve anatomic structures.
Improved patient experience
Avoid messy manual impressions and tedious stone model pour-ups by taking digital impressions. Reduce surgical time compared to freehand techniques.
Precise implant placement
Carry out precise implant procedures with confidence. Superimpose preoperative and postoperative CBCT scans to easily verify final implant placement accuracy.
Precise, Strong, Certified.
Accuracy Study
This difference map shows a 3D scan of the printed surgical guide overlaid with the original 3D model. The color mapping indicates differences with the green areas revealing dimensional accuracy within ± 50 microns. A study of 84 surgical guides printed with Dental SG resin were scanned with an orthodontic scanner and compared with the .STLs of the intended models. Results showed that printed models were dimensionally accurate within ± 100 microns over 93% of the surface area, providing a precise fit for dental surgical applications.
| Shore Hardness
|
≥ 80D
|
ISO 868:2003
|
| Flexural Strength
|
≥ 50MPa
|
ISO 20795-1:2013
|
| Flexural Modulus
|
≥ 1500MPa
|
ISO 20795-1:2013
|
EN-ISO 10993-1:2009/AC:2010
Biological evaluation of medical devices - Part 1 - Evaluation and testing
EN-ISO 20795-1:2013
Dentistry - Base Polymers - Part 1: Denture Base Polymers
EN-ISO 7405:2009/A1:2013
Dentistry - Evaluation of biocompatibility of medical devices used in dentistry